Rheology Modifiers and Filtrate Control Additives

 

SE RMC Rheology Modifier Concentrate A high quality rheology modifier used to enhance the rheology characteristics of straight oil mud systems.

 

SE LEM Rheology Modifier Concentrate An economic rheology modifier used to enhance the rheology characteristics of straight oil mud systems.

 

SE F Filtrate Control Additive A high quality, temperature filtrate control additive for oil mud and invert drilling fluid systems. SE F comes in three grades, SE F-LT (for low temperature applications), SE F-MT (for medium temperature applications) and SE F-HT (for high temperature applications).

 

SE OS-F Filtrate Control Additive This is a non-gilsonite filtrate control product used in oil mud and invert drilling fluid systems. Three grades Are available. OS-F1 (invert and diesel systems); OS-F2 (diesel and mineral oil systems); and OS-F3 (synthetic mineral oil systems).

 

SE PAC Viscosifier A high purity PAC for viscosity control. Product is available in Regular, Low and Super Low viscosity.

 

SE Econo-Vis CMC for rheology control in drilling. Lo-Vis and Hi-Vis Viscosifier grades available.

 

SE Shale-Inhib Shale Inhibitor and Filtrate A high quality, but economical product proven to be a formation enilizer by inhibiting shale

 

SE CAUSTI-LIG Causticized Lignite A quality causticized lignite drilling fluid additive.

 

SE CHS Concentrate This quality clay enilizer.. It is designed to be cut back with water and can still be diluted and prepared as a concentrate in some cases.

 

SE Lignitrol Filtration Control Agent A high quality modified lignin/polymer filtration control agent that is tolerant to contaminants such as calcium, magnesium, chloride ions and high solids. The product also functions effectively over a wide pH range and is stable up to 400°F. The product contains no heavy metals and is non-hazardous.

 

SE LCM Lost Circulation Material are treated fibers which act as oil or water humectants for lost circulation control in drilling systems.

 

SE X-Trol 1 Filtration Control Agent A chemically cross-linked water soluble, extremely high molecular weight, polymer resin designed for high-temperature/high pressure filtration control, shale inhibition and borehole enilization. It is a superior performing product in drilling mud systems and continues to function in systems where temperatures may exceed 400°F.

 

SE X-TROL 1-C Filtration Control Agent A highly concentrated version of SE -TROL 1-C. Product performance is about 2 times that of SE -TROL 1

 

SE Liqui-Thin Dispersant and Thinner is water based dispersant and thinner with temperature tolerance to over 430°F. It is non-hazardous, non-foaming, contains no heavy metals and is non-fluorescing. SE Liqui-Thin

 

SE Liqui-Thin II high temperature deflocculant dispersant and thinner is a thermally stable product to over 350°F. It is highly tolerant to calcium and alkali metal salts. The primary application is to help control the rheology of drilling fluids by reducing viscosity and gel strengths. It will reduce fluid loss in most drilling fluid systems at temperature in excess of 400°F.

 

SE PHPA Polymers are designed to be extremely effective in enilizing clays, imparting viscosity and filtration control. These products also reduce torque and the possibility of sticking when drilling with fresh water or KCl fluids.

 

SE HT-Trol High Temperature Fluid Loss Control additive is designed for high temperature fluid loss control.

Emulsifiers for Oil Mud and Invert Drilling Fluids

 

SE PRIME-VERT Primary Emulsifier Concentrate An economic grade primary emulsifier concentrate for use in oil mud and invert drilling fluid applications. The product is designed to be diluted with diesel for field strength product. This is a concentrate.

 

SE 1-C Primary Emulsifier Concentrate is a quality primary emulsifier proven for use in oil mud and invert drilling fluid applications. The product is designed to be diluted with diesel, mineral oil or other hydrocarbons for field strength application.

 

SE 1-F Primary Emulsifier Concentrate is a quality primary emulsifier proven for use in oil mud and invert drilling fluid applications. The product (Field Grade) is designed to be diluted with diesel, mineral oil or other hydrocarbons for field strength application. This is a field grade version.

 

SE 2-C Secondary Emulsifier Concentrate and Wetting Agent is a quality secondary emulsifier proven for use in oil mud and invert drilling fluids. The product is designed to be diluted with diesel, mineral oil or other hydrocarbons for field strength application. This is a quality product that imparts both secondary emulsification and wetting properties to the fluid.

 

SE 2-F Secondary Emulsifier Concentrate and Wetting Agent (Field Grade) This product is a quality secondary emulsifier proven for use in oil mud and invert drilling fluids. The product is designed to be diluted with diesel, mineral oil or other hydrocarbons for field strength application. This is a quality product that imparts both secondary emulsification and wetting properties to the fluid. This is a field grade version.

 

SE 3-C Wetting Agent Concentrate is a quality wetting agent concentrate proven for use in oil mud and invert emulsion drilling fluid applications. This product is used to enhance, replace or supplement secondary emulsifier additions.